Skip to contentSkip to footer

Electronics Sales Representative Interview Questions

Salaries
Interviews

2,698 electronics sales representative interview questions shared by candidates

1) Showed me a waveform and asked me what kind of radar emitted this kind of waveform. 2) Showed me a Darlington pair and asked me what kind of characteristics this circuit had. 3) Asked me how long it would take a battery (with a stated capacity) to drain when connected to a resistor of given resistance and two LEDs (of known voltage drop and current draw). A total of 12 questions.
avatar

Electronics Hardware Engineer

Interviewed at Samsung Electronics America

2.9★
Aug 25, 2019

1) Showed me a waveform and asked me what kind of radar emitted this kind of waveform. 2) Showed me a Darlington pair and asked me what kind of characteristics this circuit had. 3) Asked me how long it would take a battery (with a stated capacity) to drain when connected to a resistor of given resistance and two LEDs (of known voltage drop and current draw). A total of 12 questions.

they asked subject of intrest since mine was process instruments and process control so questions are like 1 -> types of temperature sensors their types range and compensations (thermocouple , rtd ,pyrometer,thermistor) 2->level sensors that u have seen in your industrial training, and for a particular size of tank which is better. (displacer, radar, ultrasonic etc) 3->types of flowmeter , and how dptx can be used for flow measurement whether it is linear or not 4-> types of flipflop and some related information regarding these why it is called flipflop 5-> difference between microcontroller and processor ,to draw pin diagram of these 6->why only 4- 20 ma signal 7->software on which i have done plc and scada , information regarding OB , FB, FC,DB and to write ladder logic for a given situation 8-> information regarding controller (pid) tunning ,which type is used when and their ploblem and solution and for a given condition which controller should be used etc
avatar

Instrumentation & Electronics Engineer

Interviewed at Jindal Steel & Power

3.6★
Jan 11, 2019

they asked subject of intrest since mine was process instruments and process control so questions are like 1 -> types of temperature sensors their types range and compensations (thermocouple , rtd ,pyrometer,thermistor) 2->level sensors that u have seen in your industrial training, and for a particular size of tank which is better. (displacer, radar, ultrasonic etc) 3->types of flowmeter , and how dptx can be used for flow measurement whether it is linear or not 4-> types of flipflop and some related information regarding these why it is called flipflop 5-> difference between microcontroller and processor ,to draw pin diagram of these 6->why only 4- 20 ma signal 7->software on which i have done plc and scada , information regarding OB , FB, FC,DB and to write ladder logic for a given situation 8-> information regarding controller (pid) tunning ,which type is used when and their ploblem and solution and for a given condition which controller should be used etc

Viewing 1221 - 1230 interview questions

Glassdoor has 2,698 interview questions and reports from Electronics sales representative interviews. Prepare for your interview. Get hired. Love your job.