They asked about a common source amplifier with degeneration, what is the gain with and without the degeneration resistor. For the second part of the same question the drain and the gate were tied together.
Senior Design Engineer Interview Questions
1,076 senior design engineer interview questions shared by candidates
Setup and Hold time constrain
opamp with resistors forming an inverting amplifier, gain -2. Non inv input at gnd = 0V There is additional resistor (R3) from inverting input to gnd. what is the voltage gain
How might all the different bit fields of the virtual address be used in the process of the CPU converting from virtual to physical addresses?
About trace driven vs execution driven modeling. Trace driven modeling is faster; and but is less realistic due to not exploring bad paths during branch prediction. Execution driven modeling usually requires the existence of a functional model - in addition to a timing model to do neat things like sampling etc.
Draw a inverter in logic form and in CMOS configuration. And explain the physics behind it.
I was asked about my experience with various HVAC systems and size, LEED process experience and Revit skills. Generally the interview questions were diverse but not very technical but felt more difficult than the average interview I have had thus far.
Take-home react assignment to create a component for a design system.
What type of work environment you appreciate
Telling my work history which kind of design work I have done earlier.
Viewing 241 - 250 interview questions